- 5 % bei Vorkasse!
Arc Audio XDi6001 1 Kanal Verstärker
XDi Class D amplifiers have several specific benefits. Compact size, high
efficiency and very low heat output are all characteristics of a Class D design.
Installation in today's cars is significantly more challenging then ever before.
When you need a realistic solution that is really up to meeting this challenge
XDi is the answer. XDi takes the different class D designs and blends them to
there best advantage. By adding the latest compact, full range chipsets to a
tried and tested low frequency class D subwoofer channel XDi really offers best
of class performance.
Full range class D is well understood however mixing it with frequency limit
class D subwoofer designs is not a common solution. Our years of engineering
experience and know how give us an uncommon insight into the issues associated
with mixing different platforms in a single design.
ARC Audio's XDi amplifiers take advantage of the latest chipsets to achieve
our signature smooth, warm and musical sound from a design that has always been
considered "Raw Power" but not high fidelity. By taking our time to sample all
the available solutions on the market we were able to select the IC that best
lived up to our high standards and was suitable for use in our mixed
architecture design.
By mixing design platforms we achieve both the sonic characteristics we are
famous for and the raw Class D power you demand to drive today's power hungry
subwoofers. Mixing these designs allow us to infinitely scale the power of the
subwoofer channels without compromise to the clarity and power of the full range
channels.
By using exclusively Class D architecture in the XDi the heat produced is
kept to a minimum making it the most compact and powerful of the ARC Audio line
while the reduction of the raw material also makes it our most affordable.
Die technischen Daten der ARCAudio XDi-600-1:
1 Channel @ 4 ohms (bridged): 250 Watts
1 Channel @ 2 ohms (bridged): 400
Watts
1 Channel @ 1 ohms (bridged): 600 Watts
Frequency Response: 20Hz -
250Hz
Crossover Range: 50Hz - 250Hz LP 24dB
Bass Boost: +15dB @
45Hz
Input Sensitivity (Low): 200mV - 3.5V
Max current draw: 74A @ 650
Watts 1%
Idle Current: 1.1 Amps
Fuse: 2 x 40 Amps
Dimensions: 9.75"(L)
x 6.5"(W) x 2.25"(H)
Die Merkmale des ARC Audio XDI 6001 Verstärkers:
- Mono-block subwoofer amplifier
- Hybrid Class D full range design
-
ARC Audio in house engineering design
- High frequency power supply design
for improved signal transparency and overall sound quality
- Remote Bass
Boost Control (Included)
- Extruded Aluminum CNC chassis design
- Nickel
Plated RCA Terminals
- Discrete Subwoofer output channels
- Input inductor
power supply isolation protects from unwanted interference with AM/FM
reception
- Block type terminal connections
- Ultra Low ESR high capacity
power supply storage bank potential fluctuations in power demand, increasing
efficiency and sound quality of chip based designs
- Phillips Technology chip
based Class D technology
- Chip based full range design produces minimal heat
allowing for installations in low circulation environments
- Embedded
protection circuits including thermal, current limit, rollback DC offset,
reverse polarity, and over voltage
Lieferumfang: 1 Endstufe inkl. Montagezubehör und
Produktanleitung
Mehr
von und über ARC Audio...
