- 5 % bei Vorkasse!
audison Prima APK 165 2 Wege Lautsprechersystem (165 / 26 mm)
Speaker systems developed using the same performance targets as the Prima
amplifiers. Astonishing efficiency, fundamental to an OEM upgrade speaker, in
conjunction with the natural sound and high power handling of a premium quality
speaker. The coax models tout the maximum in technological expression: a
concentric tweeter with acoustic lens correction combined with a pulp cone and a
32 mm (1.25 in.) voice coil. The high power handling and consequent bass
articulation, along with dispersion and phase consistency in the high frequency
range, provide the ability to achieve the performance of a competent 2-way
system in those cars where this type of system is not feasible due to physical
restraints.
With the Prima speaker range, different solutions have been introduced to
simplify, to the maximum extent, OEM Integration and achieve a result capable of
satisfying the Audison quality criteria. The electro-acoustic designers focused
their attention on those drivers dedicated in reproducing the whole audio range
the coaxial, as these are those most critical in reconstructing the sound stage
and so in recreating the "live" effect in a Car Audio system. By using advanced
technologies such as Finite Element Method (FEM) modelling, as well as a
prolonged "Voicing" phase, consisting of in-car listening sessions, it has been
decided to adopt a concentric tweeter within the woofer, providing one single
point of emission. This typology of speaker ensures that the musical signal is
reproduced with high linearity of acoustic phase; therefore the listener
perceives it as being disarmingly natural. In order to control dispersion of the
high frequency range, the concentric tweeter features an acoustic lens
specifically designed to ensure an extremely linear frequency response when
installed in the door, thus entirely off-axis. The combination of such build
choices offer the possibility to achieve performance and sound quality
comparable to a two-way system for those vehicles prohibiting this type of
speaker installation.
On top of this, a believable acoustic sound stage is
projected towards the listener. The concentric tweeter also provides the ability
to mount the speakers in extreme locations. As an example, in installations
where the tweeter of a typical coaxial driver protrudes and may come in contact
with the OEM door panel/grille, the Prima line makes the installation simple and
reliable. It was during the aforementioned "Voicing" phase that the Audison
designers decided to employ a 32 mm pure copper voice coil for the coax woofers;
an unusual choice from a technical and cost standpoint for this market range
where most competitive product employs a 25 mm coil. The reasons behind that
choice can be found in the will to respect the two main goals of this project:
high power handling and maximum efficiency. In fact, combined with an amplifier,
the 32mm coil ensures musical reproduction void of compression, especially
during musical peaks where the motor assembly has to withstand mechanical and
thermal stress. The efficiency has been maximised by eliminating low pass
crossover components for the woofer: even just a simple filter inductor in
series with the woofer, due to the resistance of its winding, introduces a loss
which in turn lowers efficiency and sound pressure level. By not employing any
type of filter, our designers had to optimize the cone profile in each model
using the Klippel R&D Scan Vibrometer to obtain a calibrated "mechanical"
low-pass cut-off frequency, therefore achieving a frequency response close to
that of a filtered woofer! The result of this exhausting work of research gave
life to a series of speakers capable of handling noticeable power combined with
high efficiency and a balanced timbre.
audison Prima APK 165 2 Wege Lautsprecher System im
Überblick:
1 AP1 tweeter with 26 mm diameter diaphragm combined with a
wide-roll surround provides maximum efficiency and reduced resonance frequency.
2 AP 1 tweeter with acoustic lens designed to compensate
for and fine tune the in-car frequency response anomalies in the 10kHz-13kHz
bandwidth caused by restrictive OEM grilles in critical OEM placements.
3 APCX TW very compact tweeter passive crossover optimised
for OEM Integration featuring an attenuation switch (0 dB, +2dB) to tune the
in-car response according to different installation conditions.
4
Passive crossovers are supplied with “OEM Integration compliant”
fast-on connectors. The ends, different in each of the two poles, eliminate any
possible connection errors and speed up the required installation time.
5 AP 5 woofer with 32 mm pure copper voice coil, for high
power handling and outstanding low frequency control.
6 AP 5
woofer with water-repellent treated paper cone, featuring a profile developed
with FEM (Finite Element Method) simulation. technology and optimized with the
Klippel R&D Scan Vibrometer.
7 AP5 woofer with reduced
mounting depth, providing ease of installation in OEM placements.
8 AP5 woofer with TPU (Thermoplastic Polyurethane)
surround, featuring the exclusive shallow "Triple Wave" profile, for maximum
excursion linearity.
9 AP 5 woofer with compact basket,
protected by abrasion-resistant and scratch-proof coating, the motor affixed
with damping epoxy adhesive.
10 AP 5 woofer with high
current fast-on terminal with double contact on positive and negative poles for
high flexibility and quick connection. The terminal features a temperature
resistant plastic cover, protecting it against accidental short
circuits.
11 AP 5 woofer with high current fast-on terminal
with double contact on positive and negative poles for high flexibility and
quick connection. The terminal features a temperature resistant plastic cover,
protecting it against accidental short circuits.
* Grille
included
Technische Daten
System: 16 cm
2-Wege
Belastbarkeit: 100 / 300 W RMS / Peak
Weiche: HP 3,5kHz 6dB
Impedanz: 4 Ohm
Frequenzbereich: 60 - 20 kHz
Schwingspule TMT /
Tweeter: 32 / 20 mm
SPL: 93,5 dBA
Parameter:
X-Max: + / - 2,5 mm
Re: 3,1
Ohm
Fs: 75 Hz
Le: 0,26 mH
VAS: 7,8 l
Mms: 12 g
Cms: 0,36 mm/N
BL: 4,7 T-m
Qts: 0,67
Qes: 0,78
Qms: 5,1
Abmessungen
Woofer (Ø): 165 mm (6,5")
Tweeter
(Ø): 26 mm (1")
Magnet Größe: 85 x 40 x 15 mm (3.35 x 1.57 x
0.59'')
Schwingspule (Ø): Woofer 32 mm (1,26") / Tweeter 20 mm
(0.8")
Gewicht eines Lautsprechers: Woofer 0,78 mm (1,72"0) / Tweeter 0,04 mm
(0,09")
Lieferumfang: 1 Lautsprechersystem inkl.
Produktanleitung und Einbauzubehör
Grill ist optional erhältlich - einfach
hier klicken
Mehr
von und über audison...
