- 5 % bei Vorkasse!
Hertz H 8 8-Kanal Digital Interface Prozessor
Hertz H8 DSP car audio processor is capable of interfacing with any
analog and/or digital source, transforming ordinary “audio” into a
high-performance integrated system. The simple and intuitive computer software
ensures a wide array of adjustments to improve the acoustic response of a
complex environment like the car compartment. It provides 7 signal inputs with a
variety of connection options: four high-level inputs, also accepting low-level
pre-amplified signals; a stereo auxiliary input and an optical digital input
accepting signals at a sample rate up to 96/24 bit. The optical digital input
(selectable through the DRC HE remote control and from the “Optical / AUX
select” terminal) nullifies interferences and signal deteriorations also
by-passing the analog signals A/D conversion stages. Thanks to the configuration
Wizard provided by the software during the set-up, the H8 DSP can automatically
sum up multiple filtered channels (for instance, woofer plus tweeter), “flatten”
the OEM source equalized response curve and reconstruct a centre, rear and/or
subwoofer channel with a simple stereo input. By reading the test track on the
CD provided, the H8 DSP recreates a full-bandwidth signal, with a flat frequency
response and released after processing for an outstanding sound quality.
The H8 DSP features 8 PRE OUT analog outputs each of them including: a 31 band
equalizer, a 68 step electronic crossover, Linkwitz- Riley or Butterworth
filters with selectable 6 – 24 dB adjustable slopes and digital time delay
functions.
Developed according to specific ergonomics criteria required by the Car Audio
industry, the PC software facilitates direct access to all the available
functions for the signal treatment, providing immediate results, as well as
extreme operational accuracy. Setting the parameters of each input single
channel, adjusting the delays according to the listening position, tuning the
crossovers and equalizers for each output channel; these are just some of the
operations that can be managed by the PC software based on Windows platform (XP,
Vista, 7, 8, 10) to be used in Standard or Expert mode.
The PC software is available in English, Italian, German, Russian, Chinese,
Japanese, Korean. The user can select the language and the change will be
applied to the drop-down menus as well as to the Context Help messages. The
number of available languages will increase: once updates are available, they
will be downloadable from the bit Drive portal (www.bitDrive.it).
The provided DRC HE enables the main system control without the use of a PC.
Thanks to this device, installed in an ergonomic position within the car
dashboard, the user can: choose between two “tuning” configurations previously
saved using the PC software; select the source from the master, auxiliary and
optical digital inputs ; adjust main system functions (volume, balance, fader
and subwoofer volume).
Die technischen Merkmale des Hertz H8 Prozessors:
- Input Stage
High Level (Speaker): FL - FR - RL - RR
Low Level
(Pre): AUX IN
- Digital Optical IN
(S/PDIF max 96 kHz/24bit): Optical IN
- Output stage
Low Level Pre (default): Front TW L/R, Front WF L/R,
Rear L/R, Sub, Center
- Connections
From / To Personal Computer: 1 x USB / B Audio
controls and Memory / Inputs selection
DRC HE: Optical In / Aux wire control
+ 12V / GND
Optical / AUX select: enable
Memory A / Memory B: Memory A/B
wire control + 12 V / GND enable
- General requirements
PC connections: USB 1.1 / 2.0 / 3.0
Compatible
- Software/PC requirements
Microsoft Windows (32/64 bit): XP,
Vista, Windows 7, Windows 8, Windows 10
- Abmessungen (Länge x Höhe x Breite)
191 x 34 x
131 mm / 7.51" x 1.33" x 4.76"
Lieferumfang: 1 Sound-Prozessor inkl. Einbauzubehör und
Produktanleitung
Mehr
von und über Hertz...
