- 5 % bei Vorkasse!
Hertz MLK165.3 165 mm 2-Wege Komposystem
The MLK 165.3 Legend car audio speakers system is composed of the ML 28.3
Legend tweeter and the ML 165.3 Legend woofer with the MLCX 165.3 dedicated
crossover. The woofer originates from the ML 1650.3 Legend, inheriting all its
technologies such as the Boundary Free Surround, the V-cone profile Pressed-pulp
cone with cotton fibres, the six spoke aluminium basket with vented holes;
however, it has been designed employing a high density ferrite magnet assembly,
characterising its emission in the mid frequency range. The woofer
originates from the ML 1650.3 Legend, inheriting all its technologies such as
the “Boundary Free Surround”, the V-cone® profile Pressed-pulp cone with cotton
fibres, the three spoke aluminium basket with vented holes; however, it has been
designed employing a high density ferrite magnet assembly, characterising its
emission in the mid frequency range. The ML 28.3 Legend tweeter mounts the same
Neodymium magnet assembly as the ML 280.3 Legend’s and features all the
optimizations made with FEA methods on the dome profile, and that it shares with
its “older brother”, except for the most esoteric features such as the die-cast
aluminium faceplate, the CNC machined body made from solid aluminium block and
the copper short circuit ring. Like MLCX 2 TW.3, also the MLCX 165.3
crossover features the “Hi-Contour” control to adjust the ML 28.3 tweeter
cut-off frequency and so the cross-point with the ML 165.3 woofer, according to
the position of the two speakers in the car. Through the tweeter three position
level control, with 2 dB step attenuation, the level for a correct timbre
balance can be fine-tuned according to one’s own tastes.
Die technischen Daten der Hertz MLK 165 3 Systems:
- Power Handling - Peak Watt: 300
- Power Handling - Continuous Watt: 150
- Impedanz: 4 Ohm
- Frequenzbereich: 40 Hz
- Sensitivity dB
SPL: 91
- Voice coil Ø mm (in.): Woofer 36 (1.4), Tweeter 28 (1.1)
-
Woofer size mm (in.): 165 (6.5)
- Tweeter size mm (in.): 35 (1.38)
-
Woofer magnet: Ferrite
- Tweeter magnet: Neodymium
- Woofer cone:
Pressed-pulp cone with cotton fibres
- Tweeter dome: Tetolon Crossover type
2 Way Passive Crossover
- Crossover cut off:3.5 kHz - 12 dB Oct
Lieferumfang: 1 Komposystem, bestehend aus je 2
Tief-Mitteltönern, 2 Hochtönern und 2 Frequenzweichen inkl. Einbauzubehör und
Produktanleitung
Mehr
von und über Hertz...
